POLY BALL VALVES

IntegriFuse Poly Ball Valves are manufactured for quality and longevity. Utilizing a polyethylene body, Nitrile (HNBR) or EPDM seats, a polypropylene ball and Op Nut, and stainless steel stems, the IntegriFuse Poly Ball Valves will be your first choice over and over again.

All standard IntegriFuse Poly Ball Valves have a ¼ turn 2” operating nut on the top for easy open and close with a wrench or standard operating nut tool. All sizes are Full Port. The ends are designed for butt fusion, electrofusion, or socket fusion installation.

We currently stock ¾” to 4”. All valves are available with Nitrile (NBR) or EPDM seats, seals and gaskets. All EPDM valves currently meet NSF/ANSI 61, AWWA C901 or C906. 

Poly Ball Valve

Valves meet ASTM D 2513 requirements, ISO 9001

Poly Ball Valves with 2” Operating Nut

IPS - SDR 11
Nominal SizePortSDRDMin W/TLHCIECVWeight
¾" IPSFull111.050".09511.50"5.12"3.70"1.06"3.62"321.1 lbs.
1" IPSFull111.315".11911.50"5.12"3.70"1.06"3.62"501.1 lbs.
1 ¼" IPSFull111.660".15111.50"5.12"3.70"1.06"3.62"791.1 lbs.
1 ½" IPSFull111.900".17311.81"5.51"3.78"1.26"3.15"1041.7 lbs.
2" IPSFull112.375".21619.53"9.65"7.01"1.77"6.69"1644.6 lbs.
3" IPSFull113.500".31821.18"11.81"8.50"2.52"6.69"3758.8 lbs.
4" IPSFull114.500".40924.02"14.92"10.39"3.58"6.69"59118.7 lbs.

NumberComponentMaterialFeatures
1BodyPolyethylenePE3408/PE4710/PE100, PE 2406
2EndPolyethylenePE3408/PE4710/PE100, or PE 2406
3BallPolypropyleneExcellent Strength & Thermal Resistance
4RetainerPolypropylenePositive seal under any condition. Retains seat
under high differential pressure
5Ball SeatNitrile (NBR) or EPDMReliable sealing from –20˚ F to 140˚ F
6StemStainless SteelExcellent durability & strength
7Stem SealNitrile (NBR) or EPDMRedundant sealing with multiple O-rings
8Weather SealNitrile (NBR) or EPDMProtects from ground water and dirt
9Operating NutPolypropylene2 inch (50mm) square

ItemOperating Feature
Designed/TestedValves meet ASTM D 2513 requirements and ISO 9001.
MaterialsPE4710/PE100 Black SDR 11 rated @ 100 PSI for gas & 200 PSI for water
TemperatureFrom –20˚ F to 140˚ F (-20° C to 60° C)
BoreReduced and Full Port
Pipe ConnectionButt Fusion
Valve BoxesIntegriFuse valves are supported by all the leading valve box manufacturers

TEMP: 74° FTEMP 100° FTEMP: 176° F
1000 Hours1000 Hours170 Hours
265 PSI214 PSI136 PSI

KNOW WHAT YOU ARE LOOKING FOR? CLICK REQUEST A QUOTE BUTTON TO GET STARTED